 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SPD30N08S2-22 OptiMOS(R) Power-Transistor Feature * N-Channel Product Summary VDS R DS(on) ID 75 21.5 30 P- TO252 -3-11 V m A * Enhancement mode * 175C operating temperature * Avalanche rated * dv/dt rated Type SPD30N08S2-22 Package Ordering Code P- TO252 -3-11 Q67060-S7413 Marking 2N0822 Maximum Ratings, at Tj = 25 C, unless otherwise specified Parameter Continuous drain current1) TC=25C Symbol ID Value 30 30 Unit A Pulsed drain current TC=25C ID puls EAS EAR dv/dt VGS Ptot T j , Tstg 120 240 14 6 20 136 -55... +175 55/175/56 kV/s V W C mJ Avalanche energy, single pulse ID=30 A , V DD=25V, RGS=25 Repetitive avalanche energy, limited by Tjmax 2) Reverse diode dv/dt IS=30A, VDS=60, di/dt=200A/s, Tjmax=175C Gate source voltage Power dissipation TC=25C Operating and storage temperature IEC climatic category; DIN IEC 68-1 Page 1 2003-05-09 SPD30N08S2-22 Thermal Characteristics Parameter Characteristics Thermal resistance, junction - case Thermal resistance, junction - ambient, leaded SMD version, device on PCB: @ min. footprint @ 6 cm2 cooling area 3) Symbol min. RthJC RthJA RthJA - Values typ. 0.7 max. 1.1 100 75 50 Unit K/W Electrical Characteristics, at Tj = 25 C, unless otherwise specified Parameter Static Characteristics Drain-source breakdown voltage V GS=0V, ID=1mA Symbol min. V(BR)DSS VGS(th) IDSS IGSS RDS(on) 75 2.1 Values typ. 3 max. 4 Unit V Gate threshold voltage, VGS = V DS ID=80A Zero gate voltage drain current V DS=75V, VGS=0V, Tj=25C V DS=75V, VGS=0V, Tj=125C A 0.01 1 1 16.7 1 100 100 21.5 nA m Gate-source leakage current V GS=20V, VDS=0V Drain-source on-state resistance V GS=10V, I D=25A 1Current limited by bondwire ; with an RthJC = 1.1K/W the chip is able to carry ID= 52A at 25C, for detailed information see app.-note ANPS071E available at www.infineon.com/optimos 2Defined by design. Not subject to production test. 3Device on 40mm*40mm*1.5mm epoxy PCB FR4 with 6cm (one layer, 70 m thick) copper area for drain connection. PCB is vertical without blown air. Page 2 2003-05-09 SPD30N08S2-22 Electrical Characteristics Parameter Dynamic Characteristics Transconductance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Gate Charge Characteristics Gate to source charge Gate to drain charge Gate charge total Gate plateau voltage Qgs Qgd Qg VDD =60V, ID =30A, VGS =0 to 10V VDD =60V, ID =30A Symbol Conditions min. Values typ. 34 1466 320 125 10 29 36 28 max. - Unit gfs Ciss Coss Crss td(on) tr td(off) tf VDS 2*ID *RDS(on)max, ID =30A VGS =0V, VDS =25V, f=1MHz 17 - S 1950 pF 425 188 15 44 54 42 ns VDD =40V, VGS =10V, ID =30A, RG =7.5 - 6.5 24 43 5.3 8.6 36 57 - nC V(plateau) VDD =60V, ID =30A V Reverse Diode Inverse diode continuous forward current Inv. diode direct current, pulsed Inverse diode forward voltage Reverse recovery time Reverse recovery charge ISM VSD trr Qrr VGS =0V, IF =30A VR =40V, IF =lS , diF /dt=100A/s IS TC=25C - 0.9 57 130 30 120 1.3 71 163 A V ns nC Page 3 2003-05-09 SPD30N08S2-22 1 Power dissipation Ptot = f (TC) parameter: VGS 6 V SPD30N08S2-22 2 Drain current ID = f (T C) parameter: VGS 10 V 32 SPD30N08S2-22 150 W A 120 110 24 P tot 100 ID 100 120 140 160 C 190 90 80 70 60 50 40 30 20 10 0 0 20 40 60 80 20 16 12 8 4 0 0 20 40 60 80 100 120 140 160 C 190 TC TC 3 Safe operating area ID = f ( VDS ) parameter : D = 0 , TC = 25 C 10 3 SPD30N08S2-22 4 Max. transient thermal impedance Z thJC = f (t p) parameter : D = t p/T 10 1 SPD30N08S2-22 K/W A 10 t = 10.0s p 0 10 2 Z thJC = V DS ID 10 -1 /I D 100 s DS (on ) D = 0.50 10 -2 10 1 R 0.20 0.10 0.05 1 ms 10 -3 0.02 single pulse 0.01 10 0 10 -1 10 0 10 1 V 10 2 10 -4 10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 0 VDS Page 4 tp 2003-05-09 SPD30N08S2-22 5 Typ. output characteristic ID = f (V DS); T j=25C parameter: tp = 80 s SPD30N08S2-22 6 Typ. drain-source on resistance RDS(on) = f (I D) parameter: VGS m V [V] GS a b c 75 A Ptot = 136W 70 SPD30N08S2-22 d e f g h i 60 4.5 4.8 5.0 5.3 5.5 5.8 6.0 6.3 10.0 60 55 50 55 R DS(on) 50 45 40 35 30 25 hd e f ID 45 40 35 30 25 20 15 10 5 a c b e d f g g h i 20 15 10 V [V] = GS 5 d 5.3 e 5.5 f 5.8 g 6.0 h i 6.3 10.0 i 0 0 1 2 3 4 V 0 5.5 0 10 20 30 40 A 60 VDS ID 7 Typ. transfer characteristics ID= f ( V GS ); V DS 2 x ID x RDS(on)max parameter: tp = 80 s 60 8 Typ. forward transconductance g fs = f(I D); T j=25C parameter: g fs 40 A S 50 45 30 g fs V VGS ID 40 35 30 25 25 20 15 20 15 10 5 5 0 0 1 2 3 4 5 0 7 0 5 10 15 20 25 30 35 40 10 A 50 ID Page 5 2003-05-09 SPD30N08S2-22 9 Drain-source on-state resistance RDS(on) = f (Tj) parameter : ID = 25 A, VGS = 10 V 85 SPD30N08S2-22 10 Typ. gate threshold voltage VGS(th) = f (T j) parameter: VGS = VDS 4 m 70 V 400 A R DS(on) 60 V GS(th) 3 2.5 80 A 50 40 30 20 10 2 1.5 98% 1 typ 0.5 0 -60 -20 20 60 100 140 C 200 0 -60 -20 20 60 100 C Tj 180 Tj 11 Typ. capacitances C = f (V DS) parameter: VGS=0V, f=1 MHz 10 4 12 Forward character. of reverse diode IF = f (V SD) parameter: T j , tp = 80 s 10 3 SPD30N08S2-22 A pF 10 2 10 3 C oss IF 10 1 C C iss T j = 25 C typ T j = 175 C typ C rss T j = 25 C (98%) T j = 175 C (98%) 10 2 10 5 10 15 20 0 0 V 30 0 0.4 0.8 1.2 1.6 2 2.4 V 3 V DS VSD Page 6 2003-05-09 SPD30N08S2-22 13 Typ. avalanche energy E AS = f (T j) par.: I D = 30 A , V DD = 25 V, R GS = 25 240 14 Typ. gate charge VGS = f (QGate) parameter: ID = 30 A pulsed 16 SPD30N08S2-22 mJ V 200 180 12 E AS 160 140 120 100 VGS 10 0,2 VDS max 0,8 VDS max 8 6 80 60 40 2 20 0 25 45 65 85 105 125 145 4 C 185 Tj 0 0 10 20 30 40 50 nC 65 QGate 15 Drain-source breakdown voltage V(BR)DSS = f (Tj) parameter: ID=10 mA 92 SPD30N08S2-22 V 88 V(BR)DSS 86 84 82 80 78 76 74 72 70 68 -60 -20 20 60 100 140 C 200 Tj Page 7 2003-05-09 SPD30N08S2-22 Published by Infineon Technologies AG, Bereichs Kommunikation St.-Martin-Strasse 53, D-81541 Munchen (c) Infineon Technologies AG 1999 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Reprensatives worldwide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Further information Please notice that the part number is BSPD30N08S2-22, for simplicity the device is referred to by the term SPD30N08S2-22 throughout this documentation. Page 8 2003-05-09 |
Price & Availability of SPD30N08S2-22
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |